Having acquired a HyperTerminal download enables a TCP/IP network to establish connections with systems found on the Internet by taking advantage of the functionalities of Telnet or Secure Shell (SSH). For dial-up modems, connections can also be established by simply dialing to modem-based systems. In addition to TCP/IP networks and dial-up modems, HyperTerminal enables communication with a wide range of devices that connect to the host computer using serial COM ports.
Basic Functions of HyperTerminal
HyperTerminal eases up the connection across the network of computers. For instance, automations can be implemented by defining key macros so that routine tasks are executed in a single command. This terminal emulation program can also be configured to adjust to host systems that may require command sequences. Because of the nature of how HyperTerminal establishes connection, messages sent across the networks, such as keystrokes, are recorded. All these information can be viewed from the HyperTerminal software client installed on the host computer. To hasten other networking operations, this program can also be configured so that passwords, user IDs, and other host commands are simply assigned to just a single key.
Setting up HyperTerminal to communicate with the modem
This terminal emulation program comes with Microsoft Windows operating systems. To get the latest update, one may opt for a HyperTerminal download right on the company website or through software download aggregators. The program can be accessed from the Start menu and is included on the Accessories submenu. Under Accessories, the Communications folder contains the executable for HyperTerminal.
Upon launching the program, the user is prompted for the name of the connection he wishes to establish along with a preferred icon to identify the connection visually. After clicking OK, a Connect To dialog box appears that prompts the user to choose the type of connection. For a modem-based system, one may connect through the COM1 port. If a dial-up connection is to be established, then other information such as country code, area code, and phone number needs be filled in.
Next, COM1 properties must then be configured under the Port Settings tab. For the typical 56k modem, data rate must be set to 57,600 or 115,200 bits per second. The settings for parity, stop bits, and flow control may be left with default settings.
Once the initial configurations are set, the HyperTerminal window appears. Through this interface, the modem may then be controlled with commands sent from this emulated terminal. To test the connection through HyperTerminal download, the AT command may be typed in. If all connections work well, then the next line returns OK. To use this configuration for other sessions, the settings can be saved as a configuration file.